Triple Voltage DC Distribution Box
HES Snap Box
OVERVIEW
The HES Snap Box was designed for use with the Series 401/451 Controllers. The box brings all three (3) DC output voltages from the Controller to the work surface in a single cable. At the work surface, the Snap Box provides three Barrel Plug outputs at 5 VDC, 12 VDC and 19.5 VDC.
KEY FEATURES
- Designed for use with the Series 401/451 Controllers
- Brings all three (3) DC output voltages from the Controller to the work surface in a single cable
Reliability
- Reliable
- Efficient
Gallery
Product Specification
Weight | |
---|---|
Full | 1560 kg (3450 lb) |
All ORELs, NVG PAPIs, MSUs and drill removed | 1385 kg (3050 lb approx.) |
Vehicle Details | |
---|---|
Nose load (approx. – with Trailer level) | <100kg (221lb) |
Wheel Rim | Pressed steel, 5.5″ x 14″ |
Tyre | 185 R14C8PR |
Tyre pressure | 4.5 bar (65 psi) |
Brakes | Internal Expanding Drum. Auto- Reversing Type |
Wheel bearing end float adjustment | 0.15mm (0.006″) MAXIMUM |
Hitch (coupling) | Hydraulically damped overrun mechanism. Fitted with 76mm NATO EYE as standard (others available), plus over-centre hand brake. |
Trailer Lighting | |
---|---|
Light fittings | 12/24 V, EEC approved fittings as standard |
Inter-vehicle connector | 12 pin NATO plug |
Torque Settings | |
---|---|
Wheel nuts | 50lb ft (67NM) |
Hitch to ‘A’ Frame, fixings | 65lb ft (88NM) |
Axle to spring clamp, fixings | 55lb ft (74NM) |
Suspension to Chassis, fixings | 35 to 40 lb-ft |