Products  >  Photonic Test Equipment  >  Image Tube Test Equipment

ANV-110-DQ
The ANV-110-DQ Image Quality Test Station is a self-contained system to perform the following Quality tests that are typical to those performed in the factory: Center Resolution, Peripheral Resolution, Useful Cathode Diameter, Image Quality, High Light Resolution, Low Light Resolution, and Halo.

This system supports 18 mm image intensifier tube MX-10160 (F9800) series and 25 mm image intensifier tube MX-11620 (F9860) series

The optical system consists of the necessary optics to project the reticle on the image tube photocathode with magnification.

The ANV 110-DQ provides:
  • Power for image tubes with internal power supplies
  • Accurate light source for testing Image Quality and Resolution
  • Projection optics to project the targets on the faceplate of the tubes
  • Specialized image tube holders for each tube supported
  • A stereo zoom microscope to view image quality and size defects using interchangeable eyepiece reticles

The given optical system assembly allows an operator to focus the image of the reticle on the tube photocathode without change of magnification.


 
Product Specifications
Power Requirements: 110/120 VAC 50/60 Hz;
Calibration Requirements: 12 months
Compatible Image Tube: 18 and 25 mm
Reticle Wheel: 6 Position USAF-1951 test reticle
Illumination level: -3 and 1x10-6 foot-candles
Calibrated Light Source: Integrating Sphere
Warranty: 1 Year
An ISO-9001:2000/AS9100
Rev. B Registered Company