MPS retrofit kits header

Single Voltage DC Distribution Box

HES DC Distribution Box

Single Voltage DC Distribution Box


The HES DC Distribution Box is ideal for bringing up a single DC output from the base of the mobile device up to the work surface. At the work surface it provides three (3) circular DIN outputs to power three individual DC loads.


  • Provides three (3) circular DIN outputs to power three individual DC loads.


  • Reliable
  • Efficient

Product Specification

Dimensions (Nominal)
Height (overall-laden with doors closed) 1800mm (71 inches)
Length (overall) 3734mm (147 inches)
Width (overall) 1644mm (65 inches)
Track 1112mm (44inches)
Full 1560 kg (3450 lb)
All ORELs, NVG PAPIs, MSUs and drill removed 1385 kg (3050 lb approx.)
Vehicle Details
Nose load (approx. – with Trailer level) <100kg (221lb)
Wheel Rim Pressed steel, 5.5″ x 14″
Tyre 185 R14C8PR
Tyre pressure 4.5 bar (65 psi)
Brakes Internal Expanding Drum. Auto-
Reversing Type
Wheel bearing end float adjustment 0.15mm (0.006″) MAXIMUM
Hitch (coupling) Hydraulically damped overrun mechanism. Fitted with 76mm NATO EYE as standard (others available), plus over-centre hand brake.
Trailer Lighting
Light fittings 12/24 V, EEC approved fittings as standard
Inter-vehicle connector 12 pin NATO plug
Torque Settings
Wheel nuts 50lb ft (67NM)
Hitch to ‘A’ Frame, fixings 65lb ft (88NM)
Axle to spring clamp, fixings 55lb ft (74NM)
Suspension to Chassis, fixings 35 to 40 lb-ft


T: (203) 425-8900

E: via our contact form